REFERENCES

ABAQUS, Version 6.4. 2004. Abaqus theory manual. ABAQUS, Inc. USA.

Atkinson, J.H. and Bransby, P.L. 1978. The mechanics of soils: An introduction to

critical soil mechanics. McGraw Hill, London.

136

Barnes, K.K., W.M. Carleton, H.M. Taylor, R.I., Throchmorton and G.E. Vanden Berg. 1971. Compaction of Agricultural Soils. ASAE monograph no. 1, St. Joseph, MI. 126-153.

Bailey, A.C., C.E. Johnson, and R.L. Schafer. 1986. A model for agricultural soil compaction. J. Agric. Eng. Res. 33:257-262.

Bailey, A.C. and C.E. Johnson. 1996. Soil critical state behavior in the NSDL-AU model. ASAE Paper 96-1064. St. Joseph, Mich.: ASAE.

Bailey, A.C. and C.E. Johnson. 1996. A soil compaction model for cylindrical stress states. Trans. ASAE 32(3): 822-825.

Beer F.P., E.R. Johnson and J.T. DeWolf. 2005. Mechanics of materials. 3^rd ed. McGraw Hill, London.

Chen, W.F. and E. Mizuno. 1990. Non-linear Analysis in soil mechanics: Theory and Implementation. Developments in geotechnical engineering vol. 53. Elsevier Science Publishing Company Inc. 655 Avenu of the Americas, New York, NY 10010, U.S.A.

Chiroux, R.C., W.A. Foster Jr., C.E. Johnson, S.A. Shoop and R.L. Raper. 2005. Three-dimensional finite element analysis of soil interaction with rigid wheel. Applied Mathematics and Computation. 162:707-722.

Coduto, D.P. 1999. Geotechnical engineering principles and practices. Prentice-Hall, Inc. Upper Saddle River, New Jersey.

Defossez, P. and G. Richard. 2002. Models of soil compaction due to traffic and their evaluation. Soil Till. Res. 67: 41-64.

Fielke, J.M. 1999. Finite element modeling of the interactions of cutting edge of tillage implements with soil. J. Agric. Engg. Res. 74: 91-101.

137

Foster,Jr. W.A., C.E. Johnson, R.C. Chiroux and T.R. Way. 2005. Finite Element Simulation of Cone Penetration. Applied Mathematics and Computation. 162: 735-749.

Gill, W.R. 1968. Influence of compaction hardening of soil on penetration resistance. Trans. ASAE 11(6): 741-745.

Gill, W.R. and G.E. VandenBerg. 1968. Soil dynamics in tillage and traction. Agriculture Handbook No. 316. USDA-Agricultural Research Service, Washington. D.C.

Huang, W., D. Sheng, S.W. Sloan and H.S. Yu. 2004. Finite element analysis of cone penetration in cohesionless soil. Computers and Geotechnics. 31(7):517-528.

Koolen, A.J. and H. Kuipers. 1983. Agricultural soil mechanics. Advanced series in agricultural sciences 13. Springer-Verlan Berlin Heidelberg, Germany.

Lunne, T., P.K. Robertson, and J.J.M. Powell. 1997. Cone penetration testing in geotechnical practices. Blackie academic and professional, London, UK.

Markauskas, D. , R. Kacianauskas, M. Suksta. 2002. Modeling the cone penetration test by the finite element method. Foundation of Civil and Environmental Engineering. No. 2. Poznan University of Technology,Poznan, Poland.

Mouazen, A. M. and M. Neményi. 1999. Finite element analysis of subsoiler cutting in non-homogeneous sandy loam soil. Soil Till. Res. 51(1-2): 1-15.

Raper, R.L., C.E. Johnson and A.C. Bailey. 1994. Coupling normal and shearing stresses to use in finite-element analysis of soil compaction. Trans. ASAE 37(5):1417-1422.

Raper, R.L. and D.C. Erbach, 1990b. Prediction of soil stresses using the finite element method. Trans. ASAE, 33: 725–30.

138

Rohani, B. and G. Y. Baladi. 1981. Correlation of mobility cone index with fundamental engineering properties of soil. International Society for Terrain-Vehicle Systems. Vol 3:959-990. Alberta, Canada.

Sanglerat, G. 1972. Interpretation of penetration diagrams- theory and practice. Developments in geotechnical engineering. Elsevier publishing company. Amsterdam, The Netherlands.

Shen, J. and R.L. Kushwaha, 1998. Soil–Machine Interaction, A Finite Element Perspective. New York: Marcel Dekker, Inc.

Söhne, W. 1958. Fundamentals of pressure distribution and soil compaction under tractor tyres. Agric. Eng. 39,276-281.

Shoop, S.A. 2001. Finite element modeling of tire-terrain interaction. Technical report ERDC/CRREL TR-01-16.

Tekeste, M. Z., R.L. Raper, E. W. Tollner and T.R. Way. 2002. Finite element anlaysis of cone penetrometer for predicting soil hardpan attributes as influenced by soil moisture, soil density and cone material. Chpt 5 of this dissertation, Submitted to the Trans. ASAE.

Upadhyaya, S. K., W. J. Chancellor, J. V. Perumpral, R. L. Schafer, W. R. Gill, and Glen E. VandenBerg (editors). 1994. Advances in Soil Dynamics. Vol. 1. American Society of Agricultural Engineers. 313p.

U.S. Army Corps of Engineers. 1948. Trafficability of soils—Development of testing instruments. Technical memo 3-240, 3d suppl. Vicksburg, MS:U.S. Army Corps of Engineers Waterways Experiment Station.

Voorhees W.B. 1991. Compaction effects on yield-are they significant? Trans. ASAE 34(4): 1667-1672.

139

Wood, M.D. 1990. Soil behavior and critical state soil mechanics. Cambridge University Press: Cambridge.

Wulfsohn, D., and B. A. Adams. 2002. Elastoplastic soil mechanics. In Advances in Soil Dynamics Volume 2, 1- 116. St. Joseph, Mich.: ASAE.

Yu, H.S., J.K. Mitchell, 1998. Analysis of cone resistance: review of methods. J Geotechnical and Geoenvironmental Engg. 141 (2): 140-149.

140